Skip to content
Fleet Scanner
Hardware integration · Teltonika FMB640

Teltonika FMB640 truck tracker, working inside Fleet Scanner

The Teltonika FMB640 is a big, powerful tracker made for heavy trucks and buses. It reads the truck’s own data, talks to the tachograph and connects fuel sensors and card readers. Teltonika stopped making it in 2023, but thousands are still on the road, and Fleet Scanner still works with them.

Tachograph live + file download2 CAN truck data (FMS)4 · 4 · 4 inputs · outputs · analogDiscontinued still supported here
Teltonika FMB640 heavy truck GPS tracker with many connection ports
4inputs
4outputs
2 + 1RS232 and RS485 ports
2CAN lines for truck data
32 GBmicroSD card support
truck_data · FMS
Fuel 68 %Hours 3,118
01 · Truck data (FMS) · CAN J1939

Read the truck’s own data

Most trucks share data on a standard called FMS. The FMB640 reads it through its two CAN lines: fuel level, fuel used, engine speed, engine hours, axle weights and AdBlue. Fleet Scanner shows these real numbers in fuel and maintenance reports.

87 Fuel level86 Total fuel used88 Engine speed104 Engine hours89–103 Axle weightsFMB640 uses its own ID list
Fuel monitoring system →
tachograph · driver cardsA3 41 9F 00
Card 1 INDriving 3h 40m
02 · Tachograph · Tachograph

Driver cards and driving time from the tachograph

A tachograph records how long each driver drives and rests, which is required by law in many countries. The FMB640 reads live tachograph data, such as which driver card is in and each driver’s working state. It can also download tachograph files remotely, so nobody has to visit the truck.

187/188 Driver card in184/185 Driver working state195–198 Driver ID Remote DDD download
Compliance reminders for fleets →
fuel · LLS sensors
Drop -60 L
03 · Fuel sensors · RS232 / RS485

Fuel sensors in every tank

Fuel sensors (long probes inside the tank) connect to the RS232 and RS485 ports. Fleet Scanner draws a fuel chart for each tank and warns you about sudden drops that may mean theft.

201–215 Fuel sensors (LLS)
Fleet fuel management software →
id + temperature · 1-Wire
Driver known
04 · Driver keys and temperature · 1-Wire + RFID

Driver keys, RFID cards and temperature probes

Drivers can identify themselves with an iButton key or an RFID card. Up to six wired temperature probes watch the load. Fleet Scanner links every trip and every reading to the right driver.

78 iButton207 RFID72–75 Temperature 1–4
Driver management software →
live_position
Speed 72 km/h
05 · Live tracking · Every record

Live tracking with outside antennas

The FMB640 uses outside antennas for GPS and the mobile network, which gives a strong signal even in a big metal truck. It takes two SIM cards and stores data on a memory card when there is no signal.

24 Speed239 Engine on/off216 Total distance
GPS fleet tracking software →
driving · eventsX -612Y 180Z 990
Speeding
06 · Driving and safety · Events

Harsh driving, crash and towing alerts

The FMB640 notices hard braking, speeding, crashes and towing, and can stop unknown drivers from starting the truck. Fleet Scanner sends the alerts and builds driver scores.

253 Harsh driving255 Speeding247 Crash246 Towing251 Immobiliser
Real-time fleet alerts →

FMB640 specifications

StatusDiscontinued by Teltonika (production ended 2023, support ended October 2025); still works with Fleet Scanner
Network2G (GSM), dual SIM, outside antennas
SatellitesGPS, GLONASS, Galileo and BeiDou
Power10 to 30 V from the truck
Backup battery550 mAh
Inputs and outputs4 inputs, 4 outputs, 4 analog inputs
Extras2 CAN (J1939 / FMS), J1708, K-Line, 2 x RS232, 1 x RS485, 1-Wire
TachographLive data and remote file (DDD) download on supported VDO, Stoneridge and Intellic tachographs
Memory2 MB plus microSD card up to 32 GB
Size and weight104.1 x 76.8 x 31.5 mm, 197 g
Fleet Scanner port11922

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the FMB640 to Fleet Scanner

  1. If the FMB640 is already in your truck, you do not need to touch the wiring.
  2. Open the Teltonika Configurator and change the server address to your Fleet Scanner server, with port 11922.
  3. In Fleet Scanner, add the tracker by its IMEI number and pick the truck.
  4. Check the live map, then check that fuel and tachograph data appear in the truck’s details.

Teltonika FMB640 FAQ

Does Fleet Scanner still support the Teltonika FMB640?

Yes. Teltonika has stopped making and updating it, but Fleet Scanner still reads its location, truck (FMS) data, tachograph data, fuel sensors, driver keys and alerts. It uses port 11922.

Should I buy a new FMB640?

No. It is discontinued, so new units are hard to find and get no updates. Keep the ones you have, and choose a current Teltonika model for new trucks. Ask us which one fits your trucks.

Can the FMB640 download tachograph files?

Yes, on supported tachographs (VDO DTCO, Stoneridge SE5000 and Intellic EFAS-4 with the right software versions). It can also send live driver card data.

Why does the FMB640 use different ID numbers?

The FMB640 has its own list of data IDs that is different from smaller Teltonika trackers. When you add it in Fleet Scanner, pick the FMB640 model so its data is read with the right list.

Keep your FMB640 trucks on one platform.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Parameter IDs follow the FMB640’s own AVL ID list, which differs from FMB1xx models. Teltonika lists the FMB640 as end of life. Teltonika and FMB640 are trademarks of Teltonika Telematics. Specifications from the Teltonika FMB640 datasheet and tachograph documentation.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo