Skip to content
Fleet Scanner
Hardware integration · Teltonika FMU130

Teltonika FMU130 3G tracker, working inside Fleet Scanner

The Teltonika FMU130 is a small vehicle tracker that sends its data over the 3G network. When there is no 3G, it drops back to 2G. It has a backup battery, driver key support and Bluetooth for wireless sensors. Teltonika no longer makes it, but many are still on the road. Fleet Scanner keeps them working, on a map and in alerts and reports.

3G with 2G backup3 · 3 · 2 inputs · outputs · analog1-Wire driver keyBluetooth 4.0 wireless sensors
Illustration of the Teltonika FMU130 GPS tracker
3Gnetwork, 2G when 3G is missing
3digital inputs
3digital outputs
422,400records kept in 128 MB
170 mAhbackup battery
live_position · 3G
3GSpeed 61 km/h
01 · Live tracking · Every record

Live position over 3G, and 2G when 3G drops

The FMU130 has its own satellite antenna inside the case. It finds the vehicle and sends the position, speed and engine state over 3G. Where 3G is weak, it uses 2G. With no signal at all, it keeps the records in memory and sends them later, so the trip on your Fleet Scanner map has no holes.

Speed Ignition (engine on/off) Moving or stopped Satellite fix PDOP / HDOP
GPS fleet tracking software →
driver_id · 1-WireA3 41 9F 00
Driver matched
02 · Know who is driving · 1-Wire

Find out which driver took the van

Plug an iButton reader into the 1-Wire wires. An iButton is a small key the driver touches to the reader. The tracker can also hold a list of known keys and check each key against it. Fleet Scanner puts the right name on every trip, so the driver score goes to the right person.

iButton (driver key) Known key list check
Driver management software →
temperature · Bluetooth
Cargo 5 °CHumidity 58 %
03 · Temperature · Bluetooth 4.0 LE

Wireless sensors for fridge trucks

The FMU130 has Bluetooth Low Energy built in. It can read wireless temperature and humidity sensors, such as Efento sensors and the TZ-BT04. There are no extra wires to run in the cargo area. Fleet Scanner saves the readings with the trip and tells you when the load is out of range.

Bluetooth temperature Bluetooth humidity
Cold chain tracking →
vehicle_data · CAN + OBD
OBD linked
04 · Vehicle data · CAN adapter + OBD dongle

Vehicle data from a CAN adapter or an OBD dongle

The tracker has two wires for a Teltonika LV-CAN adapter. The adapter listens to the vehicle’s own data network. On cars, a Bluetooth OBD dongle can give the speed the car itself reports, and the tracker can use it to tell if the vehicle is moving. What you get depends on the vehicle.

CAN adapter data OBD dongle speed
Fuel monitoring system →
inputs · outputsDIN1 Ignition ONAIN1 12.4 VDOUT1 Relay OFF
Rear door OPEN
05 · Switches and relays · Inputs and outputs

Wire in doors, buttons, pulse meters and a relay

There are three digital inputs, one negative input and two analog inputs. Two of the inputs can count pulses, for example from a flow meter. The three outputs can each carry up to 0.5 A, enough to drive a relay or a buzzer. Fleet Scanner alerts you when an input changes.

Digital inputs 1 to 3 Negative input Pulse inputs Analog inputs 1 and 2 Outputs 1 to 3
Real-time fleet alerts →
device_health · power12.6V
Power 12.6 VJamming
06 · Power and signal · Every record

Know when power is cut or the signal is jammed

Each record carries the vehicle voltage, the backup battery voltage and current, the mobile signal and sleep mode. The tracker can also spot signal jamming, a trick thieves use to hide a vehicle. Fleet Scanner warns you about these, so a silent tracker never goes unnoticed.

External voltage Battery voltage / current GSM signal Sleep mode Jamming
Fleet reports and dashboards →

FMU130 specifications

Network3G with 2G backup. World version: 3G bands B1, B2, B5, B6, B8. America version: 3G bands B2 and B5
SatellitesBuilt-in GNSS receiver and antenna, sensitivity up to -165 dBm
Power10 to 30 V from the vehicle
Backup battery170 mAh Li-Ion
Inputs and outputs3 digital inputs, 1 negative input, 2 pulse inputs, 2 analog inputs, 3 outputs (0.5 A each)
Extras1-Wire, CAN adapter wires, Bluetooth 4.0 LE, Micro-USB
Memory128 MB, about 422,400 records
Weight and temperature55 g, works from -40 to +85 °C
Fleet Scanner port11922

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the FMU130 to Fleet Scanner

  1. Put a Micro-SIM with the PIN code turned off into the FMU130. Mount it under the dashboard and connect power (10 to 30 V), ground and ignition.
  2. Connect it to a Windows laptop with a Micro-USB cable or Bluetooth and open the Teltonika Configurator. Enter the SIM’s APN, your Fleet Scanner server address, port 11922 and TCP.
  3. In Fleet Scanner, add the tracker by its IMEI number and choose the vehicle it is in.
  4. Drive around the block. Then open the live map and check that the vehicle moves with you.

Teltonika FMU130 FAQ

Can I use the Teltonika FMU130 with Fleet Scanner?

Yes. Fleet Scanner reads the FMU130’s location, engine state, inputs and outputs, driver keys, Bluetooth sensors and power data. Point the tracker at your own Fleet Scanner server on port 11922.

Is the FMU130 end of life?

Yes. Teltonika lists the FMU130 as end of life. Production ended on 3 January 2022 and Teltonika support ended on 1 May 2024. Teltonika names the FMC130 as its replacement. Trackers you already have keep working with Fleet Scanner.

Which 3G bands does the FMU130 use?

It depends on the version. The world version uses 3G bands B1, B2, B5, B6 and B8. The America version uses B2 and B5. Both fall back to 2G when 3G is not there.

What should I do if 3G is shutting down in my country?

Without 3G, the FMU130 can only use 2G, and many countries are closing 2G too. When you replace it, the FMC130 is Teltonika’s pick. It is a 4G tracker and works with Fleet Scanner on the same port.

FMU130 still on the road. Your fleet on one map.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Parameter names follow Teltonika’s FMU130 documentation. Teltonika lists the FMU130 as end of life and names the FMC130 as its replacement. Teltonika and FMU130 are trademarks of Teltonika Telematics. Specifications from the Teltonika FMU130 wiki.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo