Skip to content
Fleet Scanner
Hardware integration · Teltonika MTB100

Teltonika MTB100 motorbike tracker, working inside Fleet Scanner

The Teltonika MTB100 is a small 2G tracker made for motorbikes, scooters and other light vehicles. It has Bluetooth and a backup battery inside. It sends where the bike is, how it is ridden and when someone moves it. Fleet Scanner puts all of that on one live map, with alerts and reports. Teltonika has stopped making it, but many are still out on the road.

2G GSM network1 · 1 · 1 DIN · AIN · outputBluetooth 3.0 and 4.0Port 11922
Illustration of the Teltonika MTB100 GPS tracker
54 gwith case and battery
170 mAhbackup battery
128 MBflash memory
50geofence zones
6 to 30 Vpower input
live_position · gnss
Speed 41 km/hFix GNSS
01 · Live tracking · GNSS + GSM

See every bike on the live map

The MTB100 works out its spot from satellites and sends it over the 2G mobile network. You can pick GPS, GLONASS, Galileo or BeiDou in its settings. It saves a new point when time passes, when the bike goes a set distance, turns or changes speed. Fleet Scanner draws each ride as a line you can play back later.

Position Speed Heading Distance
GPS fleet tracking software →
ignition · voltage12.6V
Engine ONRide #3
02 · Engine on and off · Ignition settings

Knows when the bike is running

Out of the box, the MTB100 decides if the engine is on by looking at the power voltage. You can switch this to the digital input wire or to the motion sensor if that suits your bike better. Fleet Scanner uses engine on and off to split each day into separate rides.

Ignition Power voltage Digital input 1
Trip planning and trip records →
green_driving · accelerometerX -612Y 180Z 990
Sharp turnScore -1 pt
03 · Riding style · Scenarios

Harsh starts, hard braking, sharp turns and speeding

The Green Driving feature on the MTB100 spots hard speeding up, hard braking and sharp cornering. You choose if it uses the motion sensor or GPS. The Over Speeding feature flags a rider going too fast. Fleet Scanner gives each rider a score from these events.

Green driving Over speeding
Driver scorecards →
security · alarms
Towing DETECTEDAlert sent
04 · Theft and crash alerts · Scenarios

Alerts when a bike is lifted, crashed or blocked

Bikes are easy to lift onto a van. The MTB100 has Towing Detection for that. It notices when the bike is moved or tilted while the engine is off. Crash Detection uses the motion sensor to catch a fall or a hit. Jamming Detection tells you when someone blocks the mobile signal. Fleet Scanner sends each one as an alert straight away.

Towing Crash detection Jamming
Real-time fleet alerts →
auto_geofence · zones
Parked ShopLeft zone
05 · Parking and zones · Geofence settings

Auto Geofence for parked bikes, plus 50 zones of your own

When the engine goes off, Auto Geofence puts a circle around the spot where the bike is parked. If the bike leaves that circle, you hear about it. You can also set up to 50 zones on the tracker, like a shop or a depot. Fleet Scanner adds as many zones as you want on its own side.

Auto geofence Manual geofence Trip
Fleet geofencing software →
bluetooth · sensors
Box temp 5.2 °C
06 · Bluetooth extras · Bluetooth 4.0

Bluetooth sensors and beacons

The MTB100 has Bluetooth 3.0 and Bluetooth 4.0. With Bluetooth 4.0 it can read wireless sensors, such as the Teltonika EYE Sensor, and pick up beacons. That helps a delivery scooter report the temperature of its box. Fleet Scanner keeps every reading next to the ride it came from.

EYE Sensor Beacons BLE temperature
Temperature and sensor alerts →

MTB100 specifications

Network2G GSM, GPRS class 12, SMS
SatellitesGPS, GLONASS, Galileo and BeiDou (you choose in the settings)
Power6 to 30 V DC, 12 V nominal
Backup battery170 mAh Li-ion
Inputs and outputs1 digital input, 1 analog input, 1 open collector output
BluetoothBluetooth 3.0 and Bluetooth 4.0
Memory128 MB flash
Weight54 g with case and battery
Working temperature-40 to +85 °C (without battery)
StatusEnd of life (production ended November 2020)
Fleet Scanner port11922

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the MTB100 to Fleet Scanner

  1. Put in a micro SIM card with the PIN request turned off. Then connect the backup battery inside the tracker.
  2. Wire power (6 to 30 V) and ground to the bike. Fit the tracker in a hidden spot, such as under the seat.
  3. Open the Teltonika Configurator over Micro-USB or Bluetooth. Enter your SIM internet settings (APN), your Fleet Scanner server address, port 11922 and TCP.
  4. In Fleet Scanner, add the MTB100 by its IMEI number and link it to the bike. Go for a short ride and check that it moves on the live map.

Teltonika MTB100 FAQ

Can I use the Teltonika MTB100 with Fleet Scanner?

Yes. Fleet Scanner takes in the MTB100 position, speed, engine on and off, riding events, towing, crash and jamming alerts, and Bluetooth sensor readings. Point the tracker at your own Fleet Scanner server on port 11922.

Is the MTB100 still sold?

No. Teltonika lists the MTB100 as end of life. Production ended on 1 November 2020 and support ended on 1 November 2023. Teltonika names the FMB910 as its replacement. Trackers you already have keep working with Fleet Scanner.

How do I set up the MTB100 without a cable?

Bluetooth is on by default, so you can connect the Teltonika Configurator from a phone or laptop with Bluetooth. A Micro-USB cable works too.

Will the MTB100 work where 2G is switched off?

No. It only uses the 2G mobile network. If 2G is going away where you ride, pick a 4G tracker instead. Fleet Scanner works with more than 1,000 GPS devices, so you can mix old and new trackers in one account.

MTB100 on the bike. Every ride on one map.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Teltonika and MTB100 are trademarks of Teltonika Telematics. Specifications from the Teltonika MTB100 wiki pages and product page. The MTB100 is end of life per Teltonika.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo