Skip to content
Fleet Scanner
Hardware integration · TopFlyTech TLD2-L

TopFlyTech TLD2-L OBD tracker, working inside Fleet Scanner

The TopFlyTech TLD2-L is a small 4G LTE GPS tracker you push into a car’s OBD-II socket under the dashboard. TopFlyTech calls it a basic plug and play tracker: it uses the socket for power and does not read the car’s computer. It sends where the car is, how it is driven and any alarms to Fleet Scanner, running on your own server.

LTE-M NB-IoT and 2GOBD-II power only, no wiresBuzzer warns the driverDiscontinued still supported here
TopFlyTech TLD2-L tracker, a small black box with an OBD-II plug on one side
0wires to fit
3 sfastest update time
60,000points saved with no signal
200 mAhbackup battery
< 2.5 mposition accuracy
live_position · LTE-M
LTE-MSpeed 61 km/h
01 · Live tracking · GNSS + LTE

A new point on the map as often as every 3 seconds

The TLD2-L finds its place with GPS plus GLONASS, or GPS plus BeiDou. TopFlyTech gives it under 2.5 metres of accuracy. It can send a point every 3 seconds, or after a set time, distance or turn. If the car drives out of mobile coverage, it keeps up to 60,000 points and sends them once the signal comes back. Fleet Scanner fills in the gap so the trip has no holes.

0x01 Login0x02 Location0x03 Heartbeat Speed Ignition on/off
GPS fleet tracking software →
driving · 6-axis sensorA3 41 9F 00
Harsh brakingBuzzer ON
02 · Driver behaviour · Accelerometer

Harsh driving caught, and the driver hears a beep

A 6-axis motion sensor inside the TLD2-L feels hard starts, hard braking and sharp turns. When one happens, a small buzzer in the tracker sounds, so the driver knows right away. It also raises a speeding alarm once the car goes over a speed you set. Fleet Scanner adds every event to that driver’s score.

Harsh acceleration Harsh braking Harsh turning Speeding
Driver scorecards →
crash · accident datasleepmoving
Crash ALERT
03 · Crash detection · Accelerometer

Crash data you can look back at

The same motion sensor watches for a crash. When it senses one, the TLD2-L collects data about the accident so you can work out later what happened. TopFlyTech built the TLD2 series with insurance and car leasing in mind, where this matters most. Fleet Scanner sends a crash alert and keeps the record with the trip.

Crash Accident data
Real-time fleet alerts →
security · alarms
Unplugged ALERT
04 · Unplug and theft · Alarm packet

Told the moment it is pulled out or the car is towed

Anyone can pull a plug-in tracker out of the socket. When that happens, the TLD2-L switches to its backup battery and still sends a power cut alarm. It also has a towing alarm, a low battery alarm and a warning when someone jams the mobile signal. Fleet Scanner passes each alarm to the right person straight away.

0x04 Alarm Power cut Towing Jamming Low battery
Real-time fleet alerts →
bluetooth · sensors
Cargo 4 °CDoor Shut
05 · BLE sensors · Bluetooth Low Energy

Temperature, humidity and door sensors without cables

The TLD2-L talks to small Bluetooth Low Energy sensors placed in the car. TopFlyTech names three of its own: TSTH1-B for temperature and humidity, TSDT1-B for temperature and a door, and TSR1-B, a wireless relay. Sensors from other makers can work too. Fleet Scanner shows each reading next to where the car was.

0x10 BLE data Temperature Humidity Door open/closed
Fleet reports and dashboards →
network · data use12.6V
Roaming OffSignal
06 · Network and data · Device settings

LTE-M and NB-IoT, with 2G as well

The TLD2-L connects over LTE Cat M1 or NB-IoT, two kinds of 4G made for trackers. It can also use 2G (GSM/EDGE). A roaming setting stops it from using extra data abroad. It can send over TCP, UDP or MQTT, with MD5 or AES256 encryption as an option. TopFlyTech can also update its firmware over the air. Fleet Scanner warns you if a tracker stops reporting.

Data roaming control Firmware over the air Backup battery level
Fleet reports and dashboards →

TLD2-L OBDII specifications

NetworkLTE Cat M1 (B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B26, B27, B28, B66, B85), LTE Cat NB2 (B1, B2, B3, B4, B5, B8, B12, B13, B18, B19, B20, B25, B28, B66, B71, B85), GSM/EDGE 850/900/1800/1900 MHz
SatellitesMediaTek high gain receiver, GPS + GLONASS or GPS + BeiDou, 33 tracking and 99 acquisition channels
AccuracyUnder 2.5 m (CEP)
First fixWith EASY: hot under 1 s, warm under 8 s, cold under 15 s (without EASY: 1 s, 28 s, 32 s)
Power7 to 32 V DC from the OBD-II socket
Backup battery200 mAh Li-Polymer, 3.7 V
Saved pointsUp to 60,000 when out of coverage
ReportsAs often as every 3 s; by time, angle or distance
Data sent byTCP, UDP, MQTT and SMS; MD5 or AES256 encryption option
ExtrasBluetooth Low Energy, 6-axis accelerometer, buzzer, firmware over the air, USB for debugging, network and GNSS LEDs
SIM and antennasNano SIM; LTE, GNSS and Bluetooth antennas all inside
Working temperature-30 °C to +80 °C
StatusDiscontinued by TopFlyTech, which names the TorchX 310 as its upgrade; still works with Fleet Scanner
Fleet Scanner port21655

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the TLD2-L OBDII to Fleet Scanner

  1. Ask your mobile network for a data Nano SIM that works on LTE-M, NB-IoT or 2G where your cars drive. Put it in the TLD2-L before you plug the tracker in.
  2. Set the SIM’s APN, your Fleet Scanner server address and port 21655 on the tracker. TopFlyTech does not post the TLD2 setting commands on its website, so get its TLD2 user manual from TopFlyTech support and follow it.
  3. Push the TLD2-L into the OBD-II socket, which is usually under the dashboard near the steering wheel. In Fleet Scanner, add the tracker by its IMEI number and link it to the car.
  4. Take a short drive under open sky. Watch the network and GNSS lights, then check that the car moves on the Fleet Scanner live map.

TopFlyTech TLD2-L FAQ

Does Fleet Scanner work with the TopFlyTech TLD2-L?

Yes. Fleet Scanner reads the TLD2-L’s position, ignition, harsh driving, speeding, crash, power cut, towing and jamming alarms, plus readings from its Bluetooth sensors. Send its data to your own Fleet Scanner server on port 21655.

Is the TLD2-L discontinued?

Yes. TopFlyTech says the TLD2-L has reached the end of its product life and points to the TorchX 310, a 4G CAT-M1 OBD-II tracker, as the upgrade. TLD2-L units already in cars still report to Fleet Scanner.

How is the TLD2-L different from the TLD2-D?

TopFlyTech’s TLD2 series leaflet shows one main gap. The D version reads data from the car’s computer through the OBD socket, and the L version does not. The L only takes power from the socket. The D also has an extra diagnostics light.

What happens if someone unplugs the TLD2-L?

A 200 mAh battery inside keeps it running for a short while. TopFlyTech says this battery is there so the tracker can still send its power cut alarm after it loses power from the car.

Can I set up the TLD2-L by SMS?

TopFlyTech lists SMS as one of the ways the TLD2-L can send and take messages. It does not publish the command list on its website, so ask TopFlyTech support for the TLD2 manual before you text the tracker.

TLD2-L in the socket. Every alarm on your own server.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Message codes come from the TopFlyTech (T800x) protocol as decoded by Traccar; alarms and other data items are listed by name only. No SMS commands are shown because TopFlyTech does not publish them on its own site. TopFlyTech lists the TLD2-L as end of life. TopFlyTech, TOPFLYtech and TLD2-L are trademarks of their owner. Specifications from the TopFlyTech TLD2-L product page and TLD2 series leaflet.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo