Skip to content
Fleet Scanner
Hardware integration · TopFlyTech TLW2-12B

TopFlyTech TLW2-12B 4G tracker, working inside Fleet Scanner

The TopFlyTech TLW2-12B is a wired 4G GPS tracker for trailers, containers and other assets. It runs on the vehicle’s power, but it also has a big 9600 mAh battery inside. So it keeps reporting after a trailer is unhooked. It uses LTE Cat-M1 or NB-IoT, with 2G as well. Fleet Scanner reads its positions, alarms, inputs, outputs and Bluetooth sensor data. It shows them on a live map, in alerts and in reports.

LTE Cat-M1 / NB-IoT + 2G EGPRS9600 mAh battery insideIP67 waterproof casePort 21655
TopFlyTech TLW2-12B wired tracker, a light grey box with mounting ears and a cable on top
9600 mAhrechargeable battery
60,000positions stored offline
3 sfastest report rate
3 · 3 · 3inputs · outputs · configurable
< 2 mGNSS accuracy (CEP)
gps · 0x02
Speed 84 km/hBuffered 0
01 · Live tracking · T800x position message

Trailer positions as often as every 3 seconds

The TLW2-12B can send a new position every 3 seconds. It can also report on a timer, when the heading turns past a set angle, or after a set distance. If the trailer is out of signal, it saves up to 60,000 points. It sends them when it is back online, so the trip on the Fleet Scanner map has no holes.

0x02 Position report0x13 Extended position report Timer report Angle report Distance report
GPS fleet tracking software →
battery · 9600 mAh68%
Battery 71 %Truck power OFF
02 · Tracking off power · Internal battery

Keeps tracking after the trailer is unhooked

A trailer loses truck power as soon as it is parked and unhooked. The TLW2-12B then runs on its own 9600 mAh battery. TopFlyTech rates it at 320 days with a report every 10 minutes. That figure assumes 2 hours of active tracking a day, no accessories and no charging. Fleet Scanner shows the battery level, so you know when it needs power again.

Battery level Battery voltage External voltage
Trailer and container tracking →
alarm · 0x0412.6V
Power cutBackup ON
03 · Power alarms · T800x alarm message

Alerts when power is cut or the battery runs low

The tracker sends an alarm when its outside power is cut. Someone may have pulled the wires, or the trailer may just be unhooked. It sends another alarm when its backup battery gets low. Fleet Scanner turns both into instant alerts. It also keeps them in the device history.

0x04 Alarm report0x14 Extended alarm report External power cut Low backup battery
Real-time fleet alerts →
alarm · light sensorX -612Y 180Z 990
RemovedMoving YES
04 · Removal alarm · Light sensor

A light sensor that tells you when the box is opened

There is a light sensor on the back of the TLW2-12B. When it sees the light change, the tracker sends a removal alarm. That usually means someone took it off its mounting or opened its hiding place. The tracker also reports when the asset starts moving and when it parks. Fleet Scanner sends you each event as it happens.

Removal alarm Light sensor Movement Parking
Vehicle and equipment protection →
io · digital + analogDIN1 Ignition ONAIN1 12.4 VDOUT1 Relay OFF
Door CLOSEDInput 2 12.6 V
05 · Inputs and outputs · Wired I/O

Three inputs, three outputs and three flexible inputs

The TLW2-12B has 3 digital inputs and 3 digital outputs. It also has 3 inputs you can set as digital or analog. They read 0 to 32 V and count as on above 6 V. A 5 V or 12 V output can power a small sensor. Wire in door switches or a panic button. Fleet Scanner logs every change and can alert you to it.

Ignition Digital inputs 1 to 3 Outputs 1 to 3 Analog inputs
Fleet reports and dashboards →
command · 0x81
Siren ONResult OK
06 · Remote outputs · Output control

Switch a relay, buzzer or siren from far away

You can switch the tracker’s outputs on and off from a distance. TopFlyTech says they can drive relays, buzzers or sirens for anti-theft and immobilising. The tracker answers each command with a result. Fleet Scanner shows that answer, and only approved users can send the command.

0x81 Command result Output on/off
Fleet asset management software →
ble · 0x10
Cargo 3.8 °CTags 3
07 · Bluetooth sensors · BLE 5.0

Wireless temperature, door and driver ID sensors

With Bluetooth 5.0, the TLW2-12B links to TopFlyTech sensors with no wires to run. These include T-one, TSTH1-B, T-sense, TSR1-B, T-Relay and driver ID tags. Some other makers’ sensors work too. Fleet Scanner shows each reading with the position, such as cargo temperature or a door opening.

0x10 BLE data message Temperature Humidity Door Driver ID
Cold chain tracking →
behaviour · g-sensorsleepmoving
Hard brakeScore 91
08 · Driving behaviour · Motion sensing

Harsh braking, speeding up fast and sharp turns

TopFlyTech lists driving behaviour monitoring and motion detection for this tracker. It can flag hard braking, fast acceleration and sharp cornering. When the tracker rides on a truck, Fleet Scanner puts these events into each driver’s score.

0x05/0x06 Driving behaviour reports Harsh braking Harsh acceleration Sharp cornering
Driver scorecards →

TLW2-12B specifications

NetworkLTE Cat-M1 and NB-IoT, FDD bands B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28, TDD B39 (Cat-M1 only); 2G EGPRS 850/900/1800/1900 MHz
GNSSQualcomm Gen 8C; GPS, GLONASS, Galileo and BeiDou; 33 tracking and 99 acquisition channels
AccuracyUnder 2 m (CEP); first fix under 29 s cold, under 27 s warm, under 1 s hot
Power7 to 60 V DC, or the magnetic USB cable
BatteryRechargeable Li 9600 mAh, 3.6 V; about 20 hours to charge with a 5 V 1 A adaptor
Battery standby320 days at 10 min, 170 days at 5 min, 68 days at 1 min (2 h active tracking a day, no accessories, no charging)
Inputs / outputs3 digital inputs, 3 digital outputs, 3 configurable digital or analog inputs (0 to 32 V, on above 6 V), 1 output of 5 V or 12 V DC
Sensors and wirelessLight sensor, temperature sensor, Bluetooth 5.0
Antennas and LEDsInternal network and GNSS antennas; LEDs for network, GNSS and battery
Size / weight132 x 100 x 34 mm, 320 g, IP67, -25 to +80 °C
MountingMagnet or screws
DataTCP, UDP, MQTT and SMS; MD5 or AES256 encryption; firmware updates over the air; stores up to 60,000 positions
CertificationsCE, FCC, RCM, IC, E-Mark, PTCRB; AT&T, T-Mobile and U.S. Cellular approved
Fleet Scanner port21655

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the TLW2-12B to Fleet Scanner

  1. Fix the TLW2-12B to the trailer or asset with its magnets or screws. Connect power (7 to 60 V DC) and ground. Then wire any doors, sensors or relays to the inputs and outputs.
  2. Put in a data SIM that works on LTE Cat-M1, NB-IoT or 2G where you drive. Set the APN (your SIM’s internet settings) and your Fleet Scanner server’s domain or IP with port 21655. Get the setup tool or commands for this from TopFlyTech or your supplier.
  3. In Fleet Scanner, add the TLW2-12B by its IMEI number. Link it to the trailer, container or vehicle it is on.
  4. Move the asset and check the first positions on the live map. Then unplug the outside power for a moment. A power cut alert should arrive, and tracking should go on from the battery.

TopFlyTech TLW2-12B FAQ

Does Fleet Scanner work with the TopFlyTech TLW2-12B?

Yes. Fleet Scanner reads the TLW2-12B’s positions, power and removal alarms, inputs, outputs, Bluetooth sensor data and command results. The tracker reports to Fleet Scanner on port 21655. You can then use alerts, reports, the AI agent and the web and phone apps on your own server.

How long does the TLW2-12B battery last?

TopFlyTech rates its 9600 mAh battery at 320 days with a report every 10 minutes, 170 days at 5 minutes and 68 days at 1 minute. Those numbers assume 2 hours of active tracking a day, no accessories and no charging. More tracking or Bluetooth sensors means less time.

What are the SMS commands for the TLW2-12B?

TopFlyTech’s public pages list SMS as one way the tracker can send data. They do not publish a list of SMS commands. Ask TopFlyTech or your supplier for the setup tool or commands to set the APN, server and report interval.

Is the TLW2-12B the same as the TLW2-12BL?

No. TopFlyTech lists them as two separate products. This page covers the TLW2-12B only, which uses LTE Cat-M1 or NB-IoT with 2G, and has a 9600 mAh battery.

What can I track with the TLW2-12B?

TopFlyTech builds it for trailers, containers and freight. It is wired to power but keeps going on its battery. With its inputs, outputs and Bluetooth sensors, it can also watch doors, cargo temperature and drivers.

TLW2-12B on the trailer. Every asset on one map.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Specifications from the TopFlyTech TLW2-12B product page and flyer. Message types follow the T800x protocol family that TopFlyTech trackers use. Battery figures are TopFlyTech’s ratings under its stated conditions. TopFlyTech and TLW2-12B are trademarks of TopFlyTech.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo