Skip to content
Fleet Scanner
Hardware integration · WanWay GS18

WanWay GS18 GPS tracker for cars, trailers and containers on Fleet Scanner

The WanWay GS18 GPS tracker is a battery box with a strong magnet on its back, so you stick it on and fit no wires. WanWay calls it a GPS locator for cars and also sells it for trailers, containers and luggage. One battery can last about 3 years when it reports once a day. A light sensor tells you if someone finds it and takes it out. With Fleet Scanner on a server you run, each GS18 shows up on a map that belongs to you.

2G GSM quad bandMagnet no wiringLight sensor removal alarmPort 10214
WanWay GS18 GPS tracker, a black box with a navy blue front panel and a round WW logo in the middle
3 yearsstandby at one position a day
10 sshortest upload interval
0wires to fit
4wake-up times a day in alarm mode
106 gweight
gprs · 10 s
Upload 10 sFix 5 m
01 · Live tracking · GPRS uploads

Follow the GS18 with a fresh point every 10 seconds

When you need to watch a car or a load closely, the GS18 can upload its place over GPRS every 10 seconds. WanWay rates it at about 5 metres under open sky. From a cold start it needs under 38 seconds to find itself, and from a hot start under 2. Fleet Scanner keeps each point, so you can play back the route later and see every stop.

Upload every 10 s GPS fix Trace playback Real-time tracking
Live vehicle tracking →
mode · alarm / timed / week68%
Next wake 08:00Battery low
02 · Battery modes · Built-in battery

Sleep modes that make one battery last for years

The GS18 spends most of its life asleep, and it only wakes to send where it is. In alarm mode you choose up to 4 wake-up times each day. Timed return mode sends a position at a gap you pick. Week mode lets you pick a time and the days of the week it should report. WanWay says a new battery lasts about 3 years at one report a day, and a low battery alarm tells you when it is time to swap it.

Alarm mode (4 wake-ups) Timed return mode Week mode Low battery alarm
Battery and device alerts →
alarm · dark to brightSOS
RemovedSensor bright
03 · Removal alarm · Light sensor

Light on the sensor means someone has found it

WanWay builds a light sensor into the GS18 case. While the GS18 sits in a dark hiding place, all is quiet. If a thief pulls it out, the sensor sees the change from dark to bright and the tracker sends an alarm to the platform. Fleet Scanner pushes it to your phone as an alert, pinned to the last place the tracker reported, so you know where to start looking.

Light sensor Disassemble alarm Dark to bright trigger
Stolen vehicle and asset protection →
alarm · fence / speed
Zone left yardSpeed 96 km/h
04 · Geo-fence and speed · App or SMS rules

Get told when a car leaves its zone or goes too fast

Mark out a zone and the GS18 will warn you each time it crosses the edge, coming in or going out. WanWay lets you set that zone from an app or by SMS. Pick a top speed too, and an over-speed alarm fires when the car drives faster. Fleet Scanner puts no limit on zones, so a parking lot, a port gate and a customer yard can each have one.

Geo-fence in Geo-fence out Over-speed alarm
Fleet geofencing software →
fallback · cell towers
GPS no fixLBS on
05 · GPS and LBS · GPS + base station

Cell towers take over when the sky is hidden

Deep inside a container or a parking garage, satellites can be hard to reach. When GPS cannot get a fix, the GS18 turns on base station positioning (LBS) by itself. That gives a rough place from the nearby cell towers. WanWay says how close it gets depends on how many towers are around. Fleet Scanner shows these points too, so the asset never just drops off the map.

GPS positioning LBS fallback Automatic switch
Fleet reports and history →
install · magnet12.6V
Mount magnetWires none
06 · No-wire fitting · Magnet + Velcro

Stick it on metal, no tools and no cables

The back cover holds a strong magnet, and the box also comes with a Velcro strap. Because the GS18 runs on its own battery, there is no power line to find and nothing to cut. It is easy to move from one car or trailer to the next. The case is ABS and PC plastic rated IPX5, which means it can take splashing water. Fleet Scanner lets you move a tracker to a new asset in a few clicks.

Strong magnet Velcro in the box IPX5 case No wiring
Trailer and equipment tracking →
settings · sms / serialDIN1 Ignition ONAIN1 12.4 VDOUT1 Relay OFF
Last report 06:00State asleep
07 · Settings and checks · SMS, serial port, platform

Change its settings by text, cable or platform

WanWay lists three ways to talk to the GS18. Over the serial port you can set the IP and port, APN, local number, local time and the three report modes. By SMS you can set, query and correct the time. You can also check how an asset is doing from a platform, an app or a text. In Fleet Scanner each GS18 shows its last report time, so a sleeping tracker is easy to tell apart from a lost one.

Serial port setup SMS settings SMS query Platform / app check
Fleet reports and dashboards →

GS18 specifications

NetworkQuad band GSM (850, 900, 1800 and 1900 MHz) with GPRS; no 3G or 4G
PositioningGPS, with base station (LBS) positioning when GPS has no fix
AccuracyAbout 5 m under open sky
Time to first fixHot under 2 s, warm under 15 s, cold under 38 s (open sky)
GPS sensitivity-144 dBm
AntennasInside the case, for both GSM and GPS
Operating voltage3 V DC from the built-in battery
Battery lifeAbout 3 years from a new battery at one position a day
Report modesAlarm mode (up to 4 wake-ups a day), timed return, week mode; uploads as often as every 10 s
AlarmsLight sensor removal, geo-fence in / out, over speed, low battery
Buttons and lightsPower button, red GSM light, position light, light sensor
SIM cardMicro SIM, on a plan with mobile data
MountingStrong magnet on the back cover; Velcro in the box
CaseABS + PC (V0), IPX5
Working conditions-25 °C to 75 °C, 10% to 85% humidity with no condensation
Size / weight77 x 41 x 27 mm, 106 g
Fleet Scanner port10214

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the GS18 to Fleet Scanner

  1. Get a Micro SIM with mobile data turned on, and texting too if you want to use SMS. Open the GS18 and set the SIM in its holder gently, with the power switched off. WanWay warns not to put in or take out the SIM while the tracker is on.
  2. Pick a dry, hidden spot that does not shake much, away from air con vents and other electronics. WanWay suggests the glove box, under the rear windshield, under the passenger seat, inside the armrest box or a door box, or inside the front or back bumper. Press the magnet onto metal, or use the Velcro.
  3. Enter your Fleet Scanner server and port 10214 as the GS18’s server, along with your SIM’s APN. The GS18 manual lists IP and port, APN, local number, time and the report modes as settings you change over the serial port, and SMS can also set and query them. It does not print the command texts, so ask WanWay or your seller for the exact GS18 setup commands for your firmware.
  4. Choose a report mode that fits the job: up to 4 wake-ups a day in alarm mode for long battery life, or a short timed return when you need to follow a vehicle closely.
  5. In Fleet Scanner, create the device with its IMEI and attach it to the car, trailer or container it rides on. Watch the red GSM light: two fast flashes a second means it is online. If a text gets no reply, the tracker is probably asleep, so wait until it wakes and try again.

WanWay GS18 FAQ

Does the WanWay GS18 work with Fleet Scanner?

Yes. Give the GS18 your Fleet Scanner server address and port 10214. After that, its positions, zone alarms and removal alarms show on your map. Fleet Scanner sits on a server you own, comes with white label, and has a built-in AI agent, with apps for the web and for phones. It works with 1,000+ GPS devices, so your GS18 trailers can share a map with wired trackers in your vans.

What are the GS18 SMS commands?

WanWay’s GS18 user manual does not print any command text. It only says that SMS can set parameters, query them and correct the time, and it asks you to contact your seller for the details. The serial port covers the same settings: IP and port, APN, local number, time and report modes. Get the exact wording from WanWay before you send texts.

How long does the GS18 battery last?

WanWay says about 3 years from a new battery when the GS18 reports one position a day. Reporting more often, such as every 10 seconds, drains it much faster. When the battery runs low, the tracker sends a low battery alarm, and the manual’s answer for a flat battery is to replace it.

How does the GS18 know it has been taken off?

It uses a light sensor. Hidden out of sight, the sensor stays dark. When someone pulls the tracker out, the sensor goes from dark to bright and the GS18 sends a disassemble alarm to the platform. Fit it somewhere light does not reach, or the alarm may go off by mistake.

Why does my GS18 not answer a text or show a position?

Most of the time it is asleep between reports. WanWay’s fix for an unanswered text is to wait until the tracker wakes and is online, and to check the SIM can get texts. Also check that the SIM has GPRS turned on and credit left. In a basement or tunnel GPS may not work, and the GS18 then falls back to cell towers.

Is the WanWay GS18 still sold, and is it 4G?

Yes, WanWay still lists the GS18 under its wireless GPS trackers on wanwaytech.net, with a flyer, manual and specification to download. It is 2G only, so it will not connect where 2G networks have shut down. Check your local network before you buy it.

GS18 on the trailer. Years of check-ins on your own map.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Specs, modes, alarms and setup advice come from WanWay’s GS18 product page, GS18 flyer, GS18 user manual and GS18 technical data sheet on wanwaytech.net. Where they differ (battery capacity, chip, current, sensitivity, channels, GPS light colour, network protocol), the item is left out. Battery life is WanWay’s figure at one report a day. The WanWay and GS18 names belong to Shanghai WanWay Digital Technology Co., Ltd.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo