Skip to content
Fleet Scanner
Hardware integration · ATrack AX11

ATrack AX11 LTE OBD GPS tracker, reporting to Fleet Scanner

The ATrack AX11 is a 4G LTE GPS tracker shaped like a small dongle. It goes into the OBD-II socket that most vehicles have below the steering wheel. ATrack, a tracker maker from Taiwan, built it to read engine data from family cars and also from heavy trucks. Insurance by the mile, rental cars, fleets and keeping an eye on teen drivers are the jobs ATrack names for it. Set it to send to Fleet Scanner and each vehicle shows up on your own server, with alerts and reports.

LTE Cat.1 or Cat.M1OBD-II no wiringJ1939 + J1708 heavy trucksBluetooth optional BLE 4.2
Black ATrack AX11 tracker with three small lights on a blue label and an OBD-II plug at the back
120,000logs kept in memory
2.5 mposition accuracy (CEP 50%)
1.7 mAdeep sleep draw at 12 V
90 mAhbackup battery
80 gweight
position · GPS + GLONASS
GNSS GPS + GLONASSLogs Saved
01 · Live tracking · 99 channel GPS

GPS and GLONASS fixes, held in memory when signal drops

Inside the AX11 sits a 99 channel engine that uses both GPS and GLONASS. It also takes SBAS corrections from WAAS, EGNOS, GAGAN and MSAS. ATrack rates it at 2.5 metres CEP 50%, which means half of all fixes land that close or closer. Its 64 megabit flash memory holds up to 120,000 logs, so a trip through a dead zone is not lost. Fleet Scanner plots each fix as it lands and keeps the whole route so you can replay it.

Position GPS + GLONASS SBAS corrections Stored logs
GPS fleet tracking software →
vehicle_bus · J1962
Bus CANEngine ON
02 · Car engine data · OBD-II protocols

Speaks the car protocols found behind the OBD socket

Cars do not all talk the same way through the OBD port. The AX11 covers CAN (ISO 15765-4), KWP2000 (ISO 14230-4), ISO 9141-2 and both J1850 types, VPW and PWM. ATrack also lists OEM CAN data. The plug is a standard SAE J1962 Type B connector. The values you receive come down to the make and model. Fleet Scanner keeps whatever the car shares next to each trip, ready for service and fuel reports.

ISO 15765-4 CAN ISO 14230-4 KWP2000 ISO 9141-2 SAE J1850 VPW / PWM OEM CAN data
Preventive maintenance scheduling →
vehicle_bus · J1939
J1939 LinkedTruck 24 V
03 · Truck data · SAE J1939, J1587/J1708

Heavy trucks on J1939 and J1708 through an adapter cable

Big trucks often use their own data bus instead of the car one. The AX11 reads SAE J1939 and SAE J1587/J1708, so one tracker model can cover both vans and lorries. On a truck, it connects through an adapter cable. ATrack offers OBD-II to J1939 and OBD-II to J1708 cables, a Y-cable for the 9 pin socket, and a cable for Volvo and Mack trucks. The datasheet also lists an optional adapter for DEUTSCH 6 pin and 9 pin sockets.

SAE J1939 SAE J1587/J1708 DEUTSCH 6 / 9 pin adapter Volvo / Mack cable
Fleet asset management →
driving · motion sensorsX -612Y 180Z 990
EventBuzzer >70 dB
04 · Driving behaviour · Accelerometer + gyroscope

Motion sensors for driving events, plus a loud buzzer

ATrack puts a 3-axis accelerometer (±16g) and a 3-axis gyroscope (±2000 dps) in the AX11. It names driving behaviour event management and user-defined reports as main features, which is why insurers and rental firms use it. A buzzer louder than 70 dB at 10 cm sounds on the events you choose, so the driver gets a warning in the cab. Fleet Scanner gathers the events per driver for scorecards.

Driving behaviour events User-defined reports Buzzer on chosen events
Driver scorecards →
bluetooth · BLE 4.2
Tyre OKBLE ON
05 · Bluetooth · Optional BLE

Optional Bluetooth for tyre sensors and other add-ons

Some AX11 units come with Bluetooth Low Energy 4.2, Class 2. ATrack calls it an option for IoT uses, so check that your units have it before you plan on it. On the AX11 page, ATrack lists Bluetooth tyre pressure sensors to go with it: an external sensor, an internal sensor and a repeater. Fleet Scanner saves each sensor reading against the vehicle it came from.

BLE v4.2 Class 2 External TPMS sensor Internal TPMS sensor TPMS repeater
Fleet reports and dashboards →
mini_usb · RS232 / 1-WireDIN1 Ignition ONAIN1 12.4 VDOUT1 Relay OFF
Driver iButtonSOS Ready
06 · Add-ons · Mini USB port

Driver ID, panic button and a temperature probe from one port

A Mini USB port on the AX11 is more than a setup socket. With ATrack’s RS4A adapter it gives an RS232 serial line, a 1-Wire line and one digital input. The 1-Wire line is for driver ID with an iButton tag, or a temperature probe. The input can take an SOS panic button or a switch that marks a trip as business or private. Over RS232, ATrack shows an RFID reader or a Garmin navigator using FMI 2.0.

RS232 (optional) 1-Wire driver ID 1 digital input SOS button Business / private switch
Real-time fleet alerts →

AX11 specifications

NetworkAX11-MX: LTE Cat.M1 (B2/B4/B12 for AT&T, B4/B13 for Verizon); AX11-LS: LTE Cat.1 B2/B4/B5/B12/B25/B26 (Sprint); AX11-LK: LTE Cat.1 B1/B3/B5/B8/B9/B18/B19/B26/B28 plus WCDMA 800/850/900/2100 (NTT Docomo, KDDI, Telstra)
Satellites99 channel GPS and GLONASS, SBAS (WAAS, EGNOS, GAGAN, MSAS); tracking -167 dBm, acquisition -149 dBm
Accuracy2.5 m CEP 50%
Vehicle busISO 15765-4 (CAN), ISO 14230-4 (KWP2000), ISO 9141-2, SAE J1850 VPW and PWM, SAE J1939, SAE J1587/J1708, OEM CAN data
PowerVehicle 12 V or 24 V system; 60 to 300 mA working, 1.7 mA in deep sleep (at 12 V)
Backup battery3.7 V, 90 mAh (marked optional in the datasheet)
Memory64 Mbit flash, up to 120,000 logs and 21,000 queues
Inputs and extrasOptional RS232, optional 1-Wire (driver ID), optional 1 digital input, optional BLE 4.2, buzzer over 70 dB at 10 cm, 3 LEDs (power, cellular, GPS)
Sensors3-axis accelerometer ±16g, 3-axis gyroscope ±2000 dps
SIM and portsInternal Nano-SIM (4FF), Mini USB, SAE J1962 Type B plug
Data and setupUDP/IP, TCP/IP and SMS; set up with ADM, SMS or USB cable; firmware by ADM, FOTA or USB cable
Size and weight84 x 52 x 25 mm, 80 g, flame retardant ABS+PC case
Working temperature-40 °C to +70 °C without battery, -20 °C to +60 °C with battery
Fleet Scanner port21655

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the AX11 to Fleet Scanner

  1. Pick the AX11 version that fits your mobile network: the MX for LTE Cat.M1 on AT&T or Verizon, the LS or the LK for LTE Cat.1. Fit a Nano-SIM with a data plan into the internal SIM slot.
  2. Connect the tracker to a computer with a Mini USB cable and open ATrack’s ACT configuration tool. Type in the APN for the SIM, then your Fleet Scanner host name or IP with port 21655. ATrack also lets you configure the AX11 by SMS or through its ADM portal, but the AX11 command list is not public, so get it from ATrack before you text the unit.
  3. Push the AX11 into the OBD-II socket. For a truck with a J1939 or J1708 socket, use the matching ATrack adapter cable. Watch the power, cellular and GPS lights come on.
  4. Create the device in Fleet Scanner using its IMEI and pick the van, car or truck it sits in. Go for a quick drive where the sky is clear; its first points should then pop up on the map.

ATrack AX11 FAQ

Does Fleet Scanner support the ATrack AX11?

Yes. Point the AX11 at port 21655 on your Fleet Scanner server. Fleet Scanner then shows its live position, trips, engine data, driving events and alerts, on the web and on phones. Traccar’s public device list puts the AX11 in the ATrack protocol family.

Where can I find the ATrack AX11 manual and SMS commands?

ATrack posts the AX11 datasheet on its product documents page, but not a user manual or SMS command list. The datasheet says the unit can be set up by SMS, by USB cable or through ADM. Ask ATrack or your ATrack partner for the full AX11 command guide.

Can the AX11 read data from heavy trucks?

Yes. On top of the car OBD-II protocols, the AX11 reads SAE J1939 and SAE J1587/J1708, which many trucks use. You need an ATrack adapter cable, for example OBD-II to J1939, OBD-II to J1708, or the Volvo and Mack cable.

Will the AX11 drain the car battery?

ATrack gives a draw of 60 to 300 mA while working and 1.7 mA in deep sleep, both at 12 V. ATrack does not give a run time on battery alone. The datasheet lists a small 90 mAh backup battery as an option.

Is the ATrack AX11 still sold?

Yes. The AX11 is still listed on ATrack’s website under LTE OBD trackers, and its datasheet is in ATrack’s product documents. The datasheet on the site is dated July 2020, so ask ATrack which network versions you can buy today.

AX11 in the OBD port. Cars and trucks on one map.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

We name each data item in plain words and show no packet codes, since ATrack keeps the AX11 protocol off its public site. Engine data depends on what each vehicle shares. ATrack and AX11 are trademarks of ATrack Technology Inc. Specifications from the ATrack AX11 product page and the AX11 datasheet (rev. 2020-07-06).

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo