Skip to content
Fleet Scanner
Hardware integration · Jimi IoT JM-VL01

Jimi IoT JM-VL01 4G tracker, working inside Fleet Scanner

The Jimi IoT JM-VL01 is a 4G LTE GPS tracker for cars, vans and trucks. It is made by Jimi IoT (Concox). Where there is no 4G, it falls back to 3G or 2G. It has an IP65 case, an RS485 port for fuel and temperature sensors, and it can even work as a WiFi hotspot. It uses the GT06 family protocol (the language it uses to send data). Fleet Scanner reads its location, status and alarm packets. It turns them into live tracking, driving alerts and a remote cut-off.

LTE + 3G and 2G fallbackRS485 fuel / temp sensorsRelay fuel / power cutPort 10224
Jimi IoT JM-VL01 4G LTE vehicle GPS tracker
4G / 3G / 2GLTE with UMTS and GSM fallback
9-36 Vsupply range
450 mAhbackup battery
IP65water and dust resistance
< 2.5 mGNSS accuracy (CEP)
location · 0x22
Speed 54 km/hLTEACC ON
01 · Live tracking on 4G · GPS + LBS packet

Live position, speed and ignition on one map

The JM-VL01 finds its position with GPS. It also reports the cell tower it is using, and it can use WiFi to help find its place. It sends position, speed, direction (heading) and ignition (ACC) over 4G. Where there is no 4G, it uses 3G or 2G. Fleet Scanner shows every vehicle live. It keeps the full route so you can play it back.

0x22 GPS + LBS location0x01 Login0x13 Status / heartbeat Speed Course ACC
Live vehicle tracking →
alarm · driving behaviourX -612Y 180Z 990
Harsh brakingScore -2 pts
02 · Driving behaviour · Alarm packets

Harsh acceleration, braking, cornering and collision

The built-in motion sensor (accelerometer) spots harsh acceleration, harsh braking and sharp cornering. It also spots collisions. The tracker sends a speeding (overspeed) alarm too. Fleet Scanner turns these events into a simple score for each driver, and sends safety alerts to the right person.

0x26 Harsh acceleration0x1A Harsh braking0x1B Sharp cornering0x2C Collision0x06 Overspeed
Driver scorecards →
alarm · 0x16SOS
SOSPosition attached
03 · Security alarms · Alarm packets

SOS button, power cut and towing alerts

The JM-VL01 comes with a panic (SOS) button for the driver. One press sends an alarm with the position attached. The tracker also warns you when its power wire is cut, when the vehicle is towed and when the vehicle moves when it should not. Its backup battery keeps it sending after the power is cut. Fleet Scanner sends each alarm to you as an instant alert.

0x16 Alarm packet0x01 SOS0x02 Power cut Towing Vehicle movement
Fleet alerts management software →
geofence · in / out
Zone DepotFence out
04 · Geofences · Alarm packets

Geofence in and out alarms

A geofence is a zone you draw on the map. The tracker itself can send fence-in and fence-out alarms. Fleet Scanner also lets you add as many zones as you like on its side. Put them around depots, customer sites and no-go areas. Each zone can have its own alert rules.

0x04 Fence in0x05 Fence out
Fleet geofencing software →
command · relay
Cut-off ARMED
05 · Remote cut-off · Relay output

Remote fuel or power cut-off

A relay comes in the box. A relay is a switch the tracker can turn on and off. Once it is wired in, an approved user can cut the fuel pump or the power from Fleet Scanner. This helps stop a stolen vehicle. They can turn it back on later. The status packet shows if the cut-off is on.

0x80 Server command Relay output Cut-off state
Vehicle and equipment protection →
rs485 · sensors
Fuel 62 %Drop
06 · Fuel and temperature · RS485 port

Fuel and temperature sensors on the RS485 port

The JM-VL01 has an RS485 port. That is a wired socket for extra sensors. Jimi IoT offers an RS485 fuel sensor and an RS485 temperature sensor as options. The fuel sensor shows how full the tank is and warns you about sudden drops. The temperature sensor helps you protect goods that must stay cool. Fleet Scanner shows the readings on graphs next to each trip.

RS485 fuel sensor RS485 temperature sensor0x94 Info (voltage)
Fleet reports and dashboards →

JM-VL01 specifications

NetworkLTE with UMTS (3G) and GSM (2G) fallback; bands depend on the LA (Latin America), A (Americas) or E (Europe) version
GNSSGPS plus WiFi, L1, < 2.5 m CEP, hot start 1 s or less, cold start 45 s or less
Power supply9 to 36 V DC
Backup battery450 mAh 3.7 V Li-Polymer
Inputs / outputsACC (ignition) and SOS inputs, relay output
InterfacesRS485, Micro-SIM, 2.4 GHz WiFi hotspot, 3 LEDs (GNSS, cellular, power)
SensorsAccelerometer for harsh driving and collision
Size / weight113 x 51 x 20 mm, 105 g, IP65, works from -20 to +70 °C
ProtocolGT06 family (Jimi IoT)
Fleet Scanner port10224 (TCP)

Specifications can differ between hardware revisions. Check the manufacturer’s datasheet for your exact unit.

How to connect the JM-VL01 to Fleet Scanner

  1. Fit the JM-VL01 out of sight with the label side facing the sky. Connect power, ground and ACC (ignition). Wire the SOS button where the driver can reach it, and the relay if you want remote cut-off.
  2. Put in a data Micro-SIM. Send the SMS commands to set the APN (your SIM’s internet settings). Also set your Fleet Scanner server’s domain or IP with port 10224.
  3. In Fleet Scanner, add the tracker by its IMEI number and assign it to a vehicle.
  4. Take a short test drive. Check the position, ignition and alerts on the live map. Then test the SOS button.

Jimi IoT JM-VL01 FAQ

Does Fleet Scanner support the Jimi IoT JM-VL01?

Yes. Fleet Scanner reads the JM-VL01’s GT06 family location, status and alarm packets. These include harsh driving, collision, SOS, power cut and geofence alarms. Fleet Scanner also sends the relay commands. It reports on port 10224.

Is the JM-VL01 4G?

Yes. It uses 4G LTE. Where there is no 4G, it switches to 3G or 2G. It comes in three versions with different bands: LA for Latin America, A for the Americas and E for Europe. Pick the one made for your region.

What is the difference between the JM-VL01 and the JM-VL02?

Both are 4G vehicle trackers from Jimi IoT with an IP65 case and a relay for remote cut-off. The JM-VL01 uses normal LTE with 3G and 2G fallback, and it adds an RS485 port and a WiFi hotspot. The JM-VL02 uses LTE Cat-M1 and NB-IoT, which are low-power 4G networks, with 2G fallback.

Can the JM-VL01 work as a WiFi hotspot?

Yes. It can share its mobile data over 2.4 GHz WiFi. Jimi IoT says 4 to 5 devices can connect for normal use. The data goes through your tracker’s SIM card, so check your data plan first.

JM-VL01 plugged in. Fleet running on one platform.

From a single tracker to a mixed fleet across 1,000+ device models: live tracking, alerts, fuel, drivers, maintenance and reports in one self-hosted platform. See it with your own hardware.

Get a free demo

More supported GPS trackers

Packet types and alarm codes follow the GT06-family protocol used by Jimi IoT trackers. Jimi IoT, Concox and JM-VL01 are trademarks of Jimi IoT. Specifications from the Jimi IoT JM-VL01 product page and launch note.

Take Control with
Fleet Tracking

Track vehicles in real time, optimize routes, and take full control of your fleet operations.

Free Demo